Phoenix LCPC Pro power cage fitted into a single garage with bench and bumper plates
Free with every Phoenix fit-out

Send us your floor plan.
Get your gym back in 3D.

Garage, shed, PT studio or a full commercial floor. Send the dimensions, we lay it out to scale with Phoenix gear, check the clearances, and send back a plan you can build from. Free. No deposit. Back within 48 hours.

Start my free design See a sample

To scale  ·  Ceiling and bar clearance checked  ·  Priced list included  ·  Revisions free

48HRplan back in your inbox
Designing gyms since 2016Schools, clubs, defence, garages
Real footprintsEvery unit drawn at its true size
Clearance checkedCeiling, bar paths, walkways, doors
No obligationKeep the plan whatever you decide

What lands in your inbox

Not a sketch. A design sheet you can hand to a builder, an electrician, a landlord or your partner, with the numbers to back it up.

012D plan to scaleYour room, your door, every piece of gear at its real footprint, in millimetres.
023D viewsThe space fitted out from three angles so you can see how it feels, not just how it measures.
03Clearance checkCeiling height against the rack, bar zones, walkways and door swing, marked on the plan.
04Flooring countHow many tiles or mats, and where the rubber stops and the turf starts.
05Priced equipment listEverything on the plan with current pricing and freight to your postcode. Change anything you like.
06Revisions, freeSwap the cage, move the bench, drop the sled lane. We redraw until it is right.
3D render of a Phoenix two cell wall mounted rig on rubber flooring
Phoenix 2 cell wall rig, rendered

How it works

Three steps. The only one that takes your time is the first, and it takes five minutes.

1Send the space

Fill in the form below. A proper floor plan is ideal, but a tape measure and a phone photo will do.

  • Length, width, ceiling height
  • Where the door is
  • A couple of photos
  • What you want to train, and your budget band
5 minutes
2We design it

We lay the room out to scale with the gear that suits the space and the budget, run the clearance checks and price it to your door.

  • 2D plan + 3D views
  • Clearance and flooring notes
  • Priced list with freight
Back within 48 hours
3Review, revise, decide

Mark it up, we redraw. When it is right you can order the lot, part of it, or nothing at all. The plan is yours either way.

  • Unlimited revisions
  • Stage it over time if you like
  • Order online or over the phone
Your call

Two sample sheets

A single garage and a PT studio, both designed the way yours will be: plan to scale on the left, 3D on the right, the notes that matter underneath. Click to enlarge.

Sample Phoenix design sheet for a single garage home gym, plan and 3D view
Single garage, 6.0 x 3.6 m
LCPC Pro base, bench, plates, dumbbells, hip thrust. 2.6 m ceiling, cleared.
Enlarge
Sample Phoenix design sheet for a 12 by 8 metre PT studio, plan and 3D view
PT studio, 12 x 8 m
Rig, two LCPC Pro, pendulum squat, lat pull down, sled lane.
Enlarge

Any space. Any size.

The same design sheet whether it is one cage in a garage or forty racks in a club. The garage ones are the most fun.

Single garage home gym with a Phoenix LCPC Pro cage
Garage & homeSingle or double garage, spare room, under the house. We work around the car, the roller door and a low ceiling.
 Phoenix LCPC Pro cage set up inside a timber barn
Shed & barnBig floor, odd shape, uneven slab. Plan the flooring and the lifting zones before the gear turns up.
 PT studio fitted with a Phoenix three cell rig, platforms and storage
PT & group studioRig, platforms, turf lane and storage laid out for the number of clients you actually run at once.
 Commercial gym floor with a Phoenix seven cell rig
Commercial, school & defenceFull floors, strength zones, school gyms and training facilities. Drawn to the architect's plan, staged if needed.

The numbers we design to

Worth knowing before you measure up. These are the clearances behind every plan we send out.

2.4M CEILING
Minimum for a full cageThe LCPC Pro stands 2,354 mm. A 2.4 m garage ceiling clears it. Pull-ups on the top bar want 2.6 m or more; under that we spec the PSPX2 half cage or move the pull-up bar.
3.2M BAR ZONE
Width for a loaded barA 2.2 m Olympic bar plus 500 mm each side to load plates and walk around. Less than that and the bar meets the wall, the car or the roller door.
1.0M WALKWAY
Clear path to the doorKept free of gear and plates so you can get in, get out and get a loaded bar past the bench without stepping over anything.
1.0M IN FRONT
Bench-out and walk-out roomA metre in front of the rack to pull the bench out, walk out a squat and re-rack without hitting the wall behind you.
15MM RUBBER
Under every lifting zone1 m tiles under the rack and the bar paths; the count comes with the plan. Turf where sleds run, nothing where the car parks.
LCPC PRO 1407 x 1730 BAR ZONE 3.2 m 1.0 m IN FRONT WALKWAY 1.0 m CLEAR ROLLER DOOR 6000 4200
A 6.0 x 4.2 m double garage with one LCPC Pro. The car still fits on the right; the lifting zone, walkway and door are all kept clear.

Start your free design

Fill in what you know. If you only have the room size and a photo, that is enough to start. We will come back with questions if we need anything else.

  • Plan back within 48 hours, Monday to Friday
  • Floor plan, sketch or photos: attach below or send after
  • Nothing to pay, nothing to sign, the plan is yours to keep
Prefer to talk it through? 0422 046 895 sales@phoenixstrength.com.au Andy designs every plan himself. Send photos by WhatsApp to the same number.

You

The space

The gym tick all that apply

Floor plan or photos optional, you can send them after

Drop files here or tap to choose PDF, photos, sketches, CAD. We will confirm where to send them on the next screen.
Back within 48 hours, Mon to Fri.

Questions

Is it really free?

Yes. The design, the revisions and the priced list cost nothing and you are not asked for a deposit. We do it because a gym that has been planned properly is a gym that gets built, and most people who see their space in 3D buy at least part of it from us. If you don't, you still keep the plan.

What do you need from me?

At minimum: length, width and ceiling height, where the door is, and what you want to train. A floor plan, a sketch on paper or a few phone photos make it faster and more accurate. Architects' PDFs and CAD files are welcome for commercial jobs.

How accurate is it?

Every Phoenix unit is drawn at its real footprint from our production drawings, in millimetres, and the plan is to scale. Clearances are checked against the ceiling height and door you give us. If your measurements are right, the plan is right.

Can you design around gear I already have?

Yes. Tell us what you own and the sizes if you know them, and we draw it into the plan alongside the Phoenix gear so you only buy what you are missing.

How long does it take?

Home and garage designs are usually back within 48 hours on business days. Larger commercial floors with multiple zones can take a few days; we tell you up front.

Do you do commercial, school and defence facilities?

Yes. We have been designing strength floors since 2016: franchise clubs, PT studios, school gyms, sporting clubs and defence training facilities. For those we work from the architect's plan and can stage the fit-out over several deliveries.

Do I have to buy everything on the plan?

No. Order all of it, some of it, or stage it over a year. The plan is designed so the base, the bar and the bench go in first and the rest fits around them later.

Already know what you want?

HOMEHome gym packsBase, barbell, bench and plates in one order with the pack discount. Build it online, we check the fit. THE BASELCPC Pro power cageCage, lat pull down and low row in 1407 x 1730. The unit most garage designs start from. COMMERCIALFull fit-outsRigs, racks, flooring and machines for clubs, schools and studios, designed and delivered as one job.
Free 3D gym designSend the room size, get the plan back in 48 hours
Start now